EasyManua.ls Logo

WilTec CPF-50000 - Page 4

WilTec CPF-50000
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© by WilTec Wildanger Technik GmbH Seite 25
http://www.wiltec.info
Safety guideline
BEWARE:
The use of this device is allowed on standing bodies of water, garden ponds’ water or
swimming ponds and their surrounding areas only with fault current protection-switch
with a triggering nominal current up to 30mA (according to VDE 0100 article 702 and
738).
The device is not suitable for use in swimming pools, paddling pools and other bodies
of water in which during operation people or animals linger. The operation of the de-
vice during the stay of people and animals in the danger zone is not allowed. Ask
your electrician.
The device is not intended for use by persons (including children) with impaired or
limited physical, sensory and mental abilities or lack of experience and/or real
knowledge, unless they are supervised by a person responsible for their safety or you
follow the instructions made by this person how to use the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Run a visual inspection of the device before every use. Do not use the device
if the safety appliances are damaged or worn out. Never override safety regu-
lations.
Use the device exclusively according to the intended purpose stated in the in-
structions for use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must
not be repaired! It has to be replaced with a new one. This work can be carried
out only by an electrician.
The voltage indicated on the type plate of the device of 230 Volt alternating
voltage has to correspond to the existent mains voltage.
Never lift, carry or fixate the device by using the power cable.
Make sure that the electrical plug connection is placed in a flood-proof area
and is protected from moisture.
Before working on the pond filter disconnect the appliance by taking the plug
out of the socket.
Avoid exposing the appliance to a direct water jet or rain.
The user is responsible for the compliance with location specific safety and in-
stalling regulations. (Ask an electrician).
Consequential damage arising from flooded rooms caused by disfunctions of
the appliance must be avoided by means of the appropriate measures. (instal-
ling an alarm system, reserve pump).

Related product manuals