© by WilTec Wildanger Technik GmbH Seite 28
http://www.wiltec.info
Field of application / Operation mode
This UVC device ensures for healthy fish and clear water. The water is transported
by a pump through the UVC device. Thee it flows past a UV lamp and is submitted to
a UVC radiation, by the means of which the bacteria in the water, pathogens and
floating algae are destroyed, thus clearing the water.
To achieve an optimum result, the device should be in operation during 24 hours a
day in frost-free season.
Durability
The maximum temperature of the liquid to be delivered should not exceed +35°C in
continuous operation.
This pump mustn´t be used to deliver any combustible, gassing or explosive liquids.
This pump mustn´t be used for any other liquid, such us motor fuels, detergents or
other chemical products!
Commissioning
Turn on the pump and wait until the device is filled with water. Check all connections
regarding their tightness. The device is in operation when the mains power plug is
plugged in.
Technical data
600 x 600 x 815 mm
Safety
• This device produces a harmful radiation. The direct contact with skin or eyes is
harmful and is to be avoided.
• The device mustn´t be operated when it is damaged.
• The device has to be turned off when there is no water delivered.
• In case of frost, the device has to be uninstalled. There must be a frost-free stor-
age.
• Before operating the device make sure that any and all hoses and connections
are properly connected. The UVC clarifier has to be used exclusively for water!
•
The integrated UV lamp may be switched on as soon as the filter system has
been placed in an appropriate location and the pump has been properly connect-
ed.
To Next Page
Loading...
