Wilton 7060 - General Specifications

4
Cutting Capacity
At 90 degrees 12 inches Round/12 x 35 inches Rectangle
At 45 degrees 12 inches Round/12 x 12 inches Rectangle
Blade Size 1 x 0.035 x 156 inches
Blade Wheel Diameter 17 inches Diameter, Cast Iron
Blade Speeds 82 to 262 SFPM, Variable Speed
Motor 3 HP, 3 Phase, 230/460 Volts
Dimensions 87 x 31.5 x 53 Inches
Net Weight 1,144 pounds
Shipping Weight 1,279 pounds
General
Specifications
The Wilton 7060 Semi-Automatic Horizontal Cut-Off
Band Saw incorporates a number of exclusive design
features and innovations to make this saw a powerful
and productive addition to machine shops, mainte-
nance shops, tool rooms, and fabrication and welding
shops. The exclusive swivel control panel allows the
operator access to all machine controls from any side
of the machine. The exclusive 6-point contact blade
guide assemblies give the machine greater accuracy
and longer blade life. The rapid acting, patented, 3-
jaw vise provides simple, fast, and accurate set-ups
for both straight and miter cuts. In addition, the semi-
automatic cycle enables the operator to initiate, with
the push of a button, the following steps: blade start,
saw head frame down, blade stop, and saw head
frame up. This completely versatile band saw is a
proven time saver, offering optimum sawing perfor-
mance.
Specifications