Wimius P60 - Starting Projector; Image Adjustment

(X0 Support01@wimius.com
Starting Projector
1. Press the power key on the remote or projector, the indicator light will turn green.
2. Adjust the focus ring on the right side of the projector to get the best image performance; (If it is still blurry,
please try to adjust the projection distance.
3. Use the 4D keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, fire TV stick, TV box, DVD player, Computer, etc.in the
corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select
the correct source, the projector will not be able to detect the signal.
5. Select the "@" menu,enter the [ Languagel,then you can set your preferred language.
Image Adjustment
When using the projector for the first time, it normally displays an unclear image. This is due to the lens being out of
focus or the incorrect trapezoid setting.
Please follow the below steps to correct:
Focus Adjustment
- Focuing
Keystone correction