com
ee
o
Method 1: Exert yourself to flap the body of projector.
Method 2: Use the cold wind to blow the dusting mouth
NOTE: Please contact our e-mail support02@wimius.com for a video if you
need detailed steps!
Power On/Power Off
I .First connect the power cord to the projector, then connect the power cord to the
outlet before the power is turned on
2.0nce the projector is plugged in, it will be in Standby mode
3.1f not use for a long time or encounter thunder and lightning, please unplug the
power cord
Power on: Press the power button on the remote control once to tum the projector on.
Power off: Press the power button on the remote control again to turn the projector off.
Keystone Correction & Focus
To get the clearest pictures: Firstly use the remote control to adjust the keystone
correction to make image rectangle, then slowly rotate the focus lens to make the
picture clear.
Note: Keep the projector vertical with projector screen and keep it on the same
level.
08
To Next Page
Loading...
