a. DISC—Rotate the control clockwise away from ALL METAL to get
DISC mode. The DISC mode comes with auto ground balance. Rotate
the control slowly and clockwise to eliminate different trash objects.
Rotate the control counter clockwise to the end to get ALL METAL
mode. All METAL also comes with auto ground balance. It’s used to
find not only ferrous metal, but also non-ferrous one (see more details
below).
b. SENS—Rotate the control counter clockwise to the end to power off
the unit.
Rotate the control clockwise to power on the unit. Continue rotating it
clockwise to get higher sensitivity.
c. VOLUME—Rotate the control clockwise to get higher level or to get
lower volume level by rotating it counter clockwise.
d. LOW BAT—Low battery indicator. When LOW BAT indicator lights,
user should replace the batteries at once.
e. EAR— 3.5mm headphone jack for connecting headphones.
f. VIEW METER—When unit finds any metal target, the meter pointer
swings to the right.
To Next Page
Loading...
