EasyManua.ls Logo

Winco EFT-32 - In Case of Fire; Fire Response Actions; Fire Extinguisher Use

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WINCO / DWL Industries Co. 11
Spray the fire extinguisher over the well cover or
non-flammable blanket.
This will seal o additional oxygen thus smothering the re.
IMPORTANT
DO NOT remove the blanket or cover until the fire
department arrives. The oil may re-ignite.
This is high voltage equipment - be sure main
disconnect is "OFF" before proceeding.
Contact the local fire department!
Disconnect power to unit!
This will cut o power to the heating elements and allow the oil to
cool, reducing the ash point temperature and making it easier to
stop the re.
Immediately cover the well with the well cover and/or
heavy non-flammable blanket or canvas.
This will cut o oxygen to the re.
CAUTION!
DO NOT attempt to ght a grease re by spraying the
re extinguisher directly on the burning shortening.
The force will cause the burning shortening to be sprayed
on adjoining equipment making it dicult to contain the re.
Only use a re extinguisher lled with CO
2
or Halon for ammable
liquids and oils and suitable for electric powered equipment.
DO NOT use water or water based extinguisher on a grease re.
In Case of Fire

Related product manuals