Battery Lock
Seat Cushion Shock Absorber
BatteryBattery
1. Take out the screws and front fender. Install the front fender first, and then install the front wheel.
2. Remove the gasket on the front wheel shaft and the nuts on the left and right sides.
3. Remove the disc brake protective cover and insert the front axle into the hole at the center of the tire axle.
4. Align the tire center axis with the front fork, secure the front wheel, attach spacers and nuts on both sides,
and use the installation tool to tighten the nuts.
Installing The Front Wheel
U
To Next Page
Loading...