Display Introduction
How to Use Headlight & Horn
1. There are five buttons on the operating unit, the power button , the plus button , the minus button ,
the headlight button and the switch .
2. After long pressing the power button key, the instrument starts to work and the working power of the controller
is turned on. In the power-on state, short press the power button key to turn off the power of the electric bicycle.
·If the electric vehicle is not used for more than 10 minutes, the meter will automatically shut down.
3. Press and hold the minus button to enter the electric-assist promotion state. The electic bike travels at a constant
speed of 6 kilometers per hour. At the same time, the screen displays . By releasing the minus button .
The electric bicycle will immediately stop power output and return to the state before power-assisted pushing.
·The power-assisted push function can only be used when the user is pushing the electric vehicle, please do
not use it while riding .
4. Short press the headlight button key to make the controller turn on the headlights and the instrument backlight dims;
press the key again to make the controller turn off the headlights and the instrument backlight restores brightness.
5. Short press the plus button / minus button button to switch the electric vehicle power assist gear, thereby
changing the motor output power.
6. Press and hold the plus button and minus button keys to enter settings. Press the plus button or minus button
key to select a number, and press the switch key to switch to the next number selection. After entering the initial
password "1313", double-click the switch key to enter settings and switch the unit to miles.
Power display
Single mileage display
Total mileage display
Maximum speed display
Average speed display
Numerical value
and unit display
Speed display
Implementation
instructions
Headlight indication
Error indication
Gear indication
Speed unit display
Metric: km/h
Imperial: MPH
Cruise instructions
To Next Page
Loading...