Windsor Admiral ADM8 User Manual

FILLING OPERATIONS
ADMIRAL 98628 12/14/98
7
FILLING THE ADMIRAL
NOTE: Use clean bucket of water to fill solution tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry
spillage from top of solution tank before replacing
recovery tank.
CHEMICALS
Suitable Chemicals Non-Compatible Chemicals
Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
STEP
1
STEP
2
STEP
3
STEP
4
RECOVERY TANK
SOLUTION
TANK
Remove recovery
tank
FILL LINE
Replace recovery
tank
A
dd cleaning
chemical
8 – 16oz.
(237ml – 473ml)
A
dd water
8 gal.
(30.3 ltr.)
140°F
(
60°C
)
or

Windsor Admiral ADM8 Specifications

General

Brand	Windsor
Model	Admiral ADM8
Category	Floor Machine
Language	English