Winix W-3C - Drip Tray and Draining Methods

1817
❶ Lift drip tray off the product
and dispose water.
❷ Clean drip tray with a neutral
detergent.
❸ Clean the drip tray location,
on your product, with a neutral
detergent.
❹ Place drip tray back into its
original location on the product.
DRIP TRAY CLEANING
MAINTENANCE
❶ Make sure water supply valve is closed.
❷ Place a container underneath cold water outlet.
❸ Press cold water button to drain water.
DRAINING METHOD
Cold water drain
❶ Deactivate water heating system by turning Hot Water Switch to Off.
❷ It is recommended to let heating system cool down for about
30 minutes and to wear protective gear to avoid risks of burn
injury when draining hot water.
❸ After heating system has cooled down, make sure Water
Supply valve is closed.
❹ Place a container below hot water drain cap at the back of the unit.
❺ Remove hot water drain cap and drain water.
❻ Once water stop flowing, place hot water drain cap back, open
water supply valve and turn water heating system back On.
Hot water draining (W-3D & W-3TD)