SECTION 11 –
MAINTENANCE AND STORAGE
11-12
Ice Maker Start-Up
–If Equipped
1. Close all drain valves.
2. Turn the water supply on.
NOTE: Before turning the water supply on,
assure that the water faucet filter is in
place and that the water shut-off valve
(typically located inside galley cabinet
beneath sink) is OPEN.
3. Be sure the ice bin is in place and the
automatic shutoff arm is down.
4. Let the refrigerator cool down to ice making
temperature. Remember, this can take up to 24
hours.
5. Let the ice maker cycle and dump the first
batch of ice.
CHASSIS SERVICE AND
MAINTENANCE
Consult the appropriate sections in your
chassis manual for specific information
regarding operating safety, service
recommendations, and maintenance schedules
for the chassis section of your vehicle.
To Next Page
Loading...
Need help?
General
