7
2. Purge out the air
Hold the robŽƟc cleaner with two hands and submerge it into the pool. Rotate the cleaner unƟl
no air bubble is coming out.
3. Turn on the power
While keeping the enƟre robŽƟc cleaner underwater, switch on the product by pressing the power
buƩon located at the boƩom. Water will begin to Ňow out from the nozzle aŌer 5 seconds.
4. Release the cleaner
Hold the robŽƟc cleaner in its upright posiƟŽn and slowly rel
ease the product. The product shall
slowly sink to the pool Ňoor. In case the cleaner is Ňŝpped upside down, use the ŇŽaƟng handle to
correct its orientaƟŽn.
To Next Page
Loading...