Winterwarm WWFH20 User Manual

08/19729/1 (UK) Issue 1
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility
(EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336
WWFH20 Base Unit Heater

Winterwarm WWFH20 Specifications

General

Type	Fan Heater
Power	2000W
Heat settings	2
Thermostat	Yes
Overheat protection	Yes

Summary

Important Safety Advice

Installation Procedure

Cutting the aperture

Cut an aperture in the furniture unit to specific dimensions for heater installation.

Power supply connection

Connect the heater using a flexible cable and a double pole isolating switch.

Fitting the Rear Support Bolt

Fit the rear support bolt to the appliance to ensure it is level.

Marking the Fixing Positions

Mark the four fixing holes on the furniture unit after positioning the heater.

Mounting the Heater

Secure the heater into the furniture unit using the provided screws.

Remote Control Setup

Insert batteries into the remote control and place it in the wall holster.

Operation

Thermostat Operation

Thermal Safety Cut-out

Procedure for resetting the cut-out

Steps to reset the thermal cut-out after it has operated.

Cleaning & User Maintenance

General Cleaning

Maintain external appearance by wiping with a damp cloth.

Internal Cleaning & Maintenance

Clear dust and fluff from heater and compartment using a vacuum cleaner.

After Sales Service