Wisi TANGRAM GT01W0230 User Manual

www.
©WISI Communications GmbH & Co. KG
6 - 8
www.wisi.de
3.2 Backside
 Connect the GT01 chassis with grounding (a).
 Connect the GT01 Power-Supply with AC (b) or DC power; it is depending of the ordered article
number.
 Connect the Input-Signals (for example GT31 DVB-C/S/S2/T) or Output-Signals (for example
GT23 QAM) to each module.
 The control port of each module is only for a local management (default IP address:
192.168.1.20).
3.3 Frontside
 Connect a network cable on the Management Port for GT11
 Connect a network cable on the streaming ports
4 Connecting to the TANGRAM Web UI
4.1 Default IP address
Connecting to the default IP address: 192.168.0.11
The default IP address of the TANGRAM GT11 (internal Switch) on the Management port is
192.168.0.11. Set the IP address on your computer or for your network adaptor to an address in the
same address range. Use a standard web browser to connect by typing the IP address of the TANGRAM
in the address field.
4.2 Changing IP address
It is recommended to change to a unique IP address in your network. You can change the IP address
under WISI Control GT11  Settings  Networking  Edit Settings
(a) grounding
(b) AC power cable
(b) AC power cable
redundant PSU
Control Port for local
Management
1x RJ45 port for
manage the GT11 and
all modules
4x RJ45 ports (internal
switch) for input/output
transport streams

Wisi TANGRAM GT01W0230 Specifications

General

Brand	Wisi
Model	TANGRAM GT01W0230
Category	Control Unit
Language	English