EasyManua.ls Logo

Wisper 705 - Bike Stand; Panniers; After Your Ride; Troubleshooting

Default Icon
5 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Sean Moroney/Emma Pery 5 Sep 2020 E-Bike Rider’s Handbook doc no. 07
Adjust the seat to the correct height and close the lever firmly. When you sit on the saddle there
should be no vercal movement. Never apply grease to the seat post .
Bike Stand
On the le hand side. Don’t set it off with it down.
Panniers
These are fixed by Velcro fastenings only. You are advised to load them equally on each side.
Aer your ride
Control system will switch off automacally aer a few minutes. You can switch the system off by
pressing the ON/OFF buon once. Or at the baery by turning the baery switch to OFF.
To charge the baery on the bike plug the big round connector into the baery.
PLEASE RETURN THE E-BIKE TO THE E-BIKE IN THE ABINGTONS TEAM WITH A FULLY CHARGED
BATTERY . THANK YOU.
Troubleshoong
The tyres on this e-bike have high puncture-resistance so a puncture is highly
unlikely as long as roads & paths suitable for cycling are used. In the event
of a puncture, it is your responsibility to return the bike to your hire
address . If you cannot repair the puncture yourself, Wayne Atherton (M: 07469
963603 ), who is local, offers this service.
In the case of serious Accident with the E-bike, contact emergency services
on 999 and inform emma.pery@gmail.com and Bernie.talbot@btinternet.com
at the earliest opportunity.
In case of E-Bike malfunction, please call the E-BA team on:
07818 062952 (Emma Pery) or
07849 693973 (Bernie Talbot ) or
01223 891960 (Peter Brunning)
If the battery will not charge properly, please text or call Emma Pery on 07818
062952.

Related product manuals