WisyCom MAT244 - Technical Specification; Environmental Information

MAT244 User Manual
rev.01
12
TECHNICAL SPECIFICATION
Power supply
:
AC connector 90÷264Vac / T2A, 47÷63Hz
Working frequency
:
150 ÷ 840 MHz
Amplifier linearity
:
± 1 dB (typical)
“A” / “B” antenna
input
:
8 BNC type connector
antenna output
:
4 BNC type connector
Impedance
50 Ω
Input/output Gain
:
7 dB (combiner 8:1), OIP3=30dBm typ.
0 dB (combiner 8:4), OIP3=24dBm typ.
7 dB (diversity combiners 4:2), OIP3=30dBm typ
Noise Figure
5.5dB (each channel)
Antenna booster
powering
:
+12Vcc / 800mA MAX.(ports 1a, 1b)
+12Vcc / 230mA MAX.(other ports)
Configuration/monitor
interfaces
:
10/100 Base TX Ethernet port
Display
:
64 x 256 OLED (yellow)
Dimension
:
Standard rack (aluminum) 19” / 1U.
Weight
:
3,7 Kg
Type approvals
In compliance with
EN 301 489-1/-9
EN 600065
EN 300 422-1/-2
47 CFR 15 Subpart B
Statements regarding FCC and Industry Canada
This device complies with part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
In compliance with
47 CFR 15 Subpart B
CAN RSS-Gen/CNR-Gen
ENVIRONMENTAL INFORMATION
Applicable in the European Union and other European countries with separate collection systems