WT901C RS232| manual v0707 | http://wiki.wit-motion.com/english
3.3 Connection
Step 1. Install the APK file, give permission of Storage.
Step 2: Connect the sensor with TTL cable. Then connect the cable with type-c
converter. Plug in the device “type-c converter” to the phone.
Notice:
1. After successful connection, there will be a notification reminding that
“Choose an APP for the USB device”, which means that the device has been
detected. Choose “WitMotion”, “ JUST ONCE” or “ALWAYS” is optional.
2. Only CH340 driver can be detected via WitMotion APP.
To Next Page
Loading...
