WTVB01-BT50 Vibration sensor instruction manual
Product specification:
Type number: WTVB01-BT50
Description: Bluetooth 5.0 vibration sensor
1. Product overview
1, module internal voltage stability circuit, internal equipped with lithium battery,
3.7V power supply, easy connection.
2, the use of advanced digital filtering technology, can effectively reduce the
measurement noise, improve the measurement accuracy.
3. At the same time, provide various kinds of upper computer, use instructions,
development manuals required by users, so that the research and development time
for various needs is reduced to the minimum.
4, Support Type-C interface, convenient for users to choose the best connection mode.
Serial port rate 115200bps.
5. The cut-off frequency is adjustable from 0 to 100Hz, and the detection cycle is
adjustable from 1 to 100Hz.
6, three axis displacement, three axis speed, three axis Angle, three axis frequency
output, to meet the user's vibration and impact comprehensive measurement, judge
whether the measured object (motor water pump) is damaged. If there is a machine
fault caused by bearing wear, bearing cracking, poor dynamic balance and moderate
factors, vibration sensor can detect the fault in advance and put forward an early
warning, to prevent the machine from continuing to work in bad condition and causing
damage, thus bringing economic losses.
7, application field: can be widely used in submersible pump, fan, turbine unit,
coal mill, system. The bearing vibration measurement and real-time monitoring of
oxygen machine, generator, centrifuge, compressor, water pump, motor and other
rotating machinery.
2. Parameter indicators
Basic parameter
To Next Page
Need help?
General
