Withings Move ECG - Dissociating Your Watch

EN-40
Move ECG
v1.0 | August, 2019
Dissociating your watch
Dissociating your Move ECG allows you to remove it from your account. Once it is
no longer linked to your account, it can be installed on another account or on the
profile of another user of your account.
Dissociating your Move ECG will not remove any of your data from the
Health Mate app.
To dissociate your Move ECG, perform the following steps:
1. Press and hold the button of your Move ECG for 10 seconds. Workout mode
will start after pressing the button for about one second, but continue pressing
it until the watch vibrates 2 times.
2. Release the button. The activity hand goes to the 50% mark.
3. Press the button 5 times so that the activity hand reaches progressively the
0% mark. Please wait until the activity hand reaches each mark of the activity
dial before pressing the button again.
4. Your Move ECG has been correctly reset and the hands move to their initial
position.
5. Go to the Bluetooth settings of your mobile device and “forget” your
Move ECG (for iOS users only).
6. Open the Health Mate app.
7. Go to Devices.
8. Tap Move ECG.