WMF 2000S - Submenu standards factory-service;customer

12
WMF 2000 S Service Manual Edition 11/2010
WMF 2000 S Service Manual
3.10 Submenu standards factoryservice/
customer
After tapping, “self-detect” is first run automatically. All
components operating on 24 V or 30 V are automatically
addressed. The components are automatically identified.
During self-detect the grounds container must be in
place, the adjustable screen closed otherwise the 24/30 V
circuits of the components are interrupted.
Factoryservice/customer menu 1
OEM customer selectable
Configuration of grinders
Configuration of powder dosing
OEM Customer selectable (McDonalds, USA, No).
Configuration of grinders will be detected automatically
(see chapter portioner).
Configuration of powder dosing, will be detected
automatically (see chapter portioner).
Factoryservice/customer menu 2
Steam boiler available
Steamer selectable
Fresh milk (Cappuccino valve) Aquaflex available
Steam boiler will be detected automatically at the infeed
valve (see chapter boiler-water system).
Steamer can be selected.
Milk will be detected automatically
(see chapter boiler-water system).
See chapter engineering, portioner
See chapter engineering, boiler/
steam boiler in Training manual
Part 2 Engineering
See chapter boiler-water system
in Training manual
Part 2 Engineering.