WMF DYNAMIC - OPERATING INFORMATION
MILK PUMP CALIBRATION
VERSION. 1.2.18
STEP 10.
Select start.
STEP 8.
STEP 9.
Machine will begin milk calibration
process.
continued
NOTE. STEP 6.
Once initial step is completed, place the measuring
cup below the spout.
STEP 7.
PAGE 02
Keep measuring cup at hand (min 600ml).
If the measuring result is at 500ml (give or take
20ml) select Yes, if not, select No to preform again.
Machine will dispense water. Once the 500ml level is
reached press stop, must be as accurate as possible.
To Next Page
Loading...
