Need help?Do you have a question about the WMF 5000 S+ and is the answer not in the manual?
General| Brand | WMF |
|---|---|
| Model | 5000 S+ |
| Category | Coffee Maker |
| Language | English |
Lists supplementary documents related to the service manual.
Lists customer/technician documents and detailed features.
States documents are subject to change and should be kept updated.
1st edition for series launch.
Expansion brewer, maintenance concept, special tools.
Expansion FFC maintenance concept.
Expanded maintenance for Dynamic Milk.
QR code link video maintenance instructions.
General overhaul and added topics.
Details preparatory work for electricity, water, and drainage connections.
Covers general activities for connecting the coffee machine.
Illustrates drain slope and hose attachment with safety warnings.
Steps for connecting to power and switching on the machine.
Recommends filter use and water hardness testing.
Details electrical connections on the machine's back panel.
Explains the purpose of the technician's guided setup.
Outlines the steps for initial setup and language selection.
Instructions for setting automatic Daylight Saving Time.
Guide to adjusting the machine's time and date.
Describes the prompt for initiating the machine start-up.
Instructions for entering the technician PIN for access.
Indicates a page explaining setting steps in detail.
Instructions for adjusting machine configuration settings.
Explains sequential processing of menu items during setup.
Notes that a final page concludes the technician's intro.
Details about the HD brewer used in the WMF 5000 S+.
Specific instructions for FFC brewers regarding portafilter replacement.
Explains how to check and adjust the distance for the brewer sensor.
Information on the pump, its pressure setting, and alignment.
Crucial notes regarding the espresso pump's self-priming and operation.
Details right and left/center grinder pre-sets and notes.
Steps for performing mechanical basic settings on the grinder.
Guide on using electrical settings for grinder degree adjustment.
Explains the necessity and procedure for portioner calibration.
Lists essential preconditions and equipment needed for calibration.
Procedure for calibrating grinder idle current for notifications.
Details on monitoring and adjusting beverages with Dynamic Coffee Assist.
Steps for calibrating the powder portioner for Choc/Topping.
Lists necessary preconditions and equipment for powder calibration.
Explains the function and correction of the dynamic milk pump.
Important note on disassembling the milk pump head to prevent damage.
Information on the platform power supply and its compatibility.
Discusses power supply settings for different versions and its self-protection.
Guide on using a test tool to check power supply voltage.
Steps for checking different voltage outputs from the power supply.
Information about the platform power stage and its software.
Details the power stage's protection against overcurrent and short circuits.
Explains the CAN bus communication and the need for termination resistors.
Details DIP switch settings for various components connected to the CAN bus.
Overview of the front panel and its integrated components.
Explains the role of the micro-SD card and guidelines for USB sticks.
Instructions for using the panel updater to program the front panel.
Steps for installing new or used front panels and reinitializing them.
Describes the step-by-step process for the panel updater.
Steps for selecting and confirming the desired software version for the panel updater.
Steps for confirming installation and restarting the machine.
Software detection of spare panels and checking for SD card backup.
Describes transferring data backup from SD card.
Steps for machine power off, SD card insertion, and confirmation.
Displaying and selecting available data backups from the SD card.
Process for backup without SD card, including serial number entry.
Acknowledging messages and starting the machine.
Overview of the machine's fan system.
Details the power stage fan, its power, and function.
Describes the machine exhaust fan, its power, and function.
Explains the Power Class and its impact on machine functionality.
Critical instruction that software-adjustable Power Class must match the rating plate.
Routine for preparing the machine for shipping during winter months.
Important instructions regarding thawing and freezing during shipping.
Information on accessing and understanding piping diagrams.
Information on ordering parts, hoses, and valves.
Overview of WMF's maintenance concept based on time/serving cycles.
Lists additional installation requirements for service maintenance 2.
Details components and part numbers for Service Maintenance 1 (Standard).
Details components and part numbers for Service Maintenance 1 (FFC).
Lists parts for Service Maintenance 2 for Easy Milk // Dynamic Milk.
Procedure for descaling and important notes for the process.
How to start the technician descaling routine from the menu.
Details manual insert jumpers and multitool service units for specific models.
Describes test tools, gages, and adapter cables for checks.
Mentions USB mouse/keyboard and USB stick usage.
To Next Page
