WMF 5000 S+ - SD Card Backup Selection and Loading; Alternative Backup Process (Serial Number)

Service 30
3 - All of the data backups saved on the SD card are displayed.
Select and confirm the data backup to be loaded.
4 – Acknowledge the security dialogue, then the data backup will be
loaded and the machine will be restarted.
Further process flow description, if the backup is not to be loaded from the SD card:
1 - Enter the serial number from the machine rating plate
The name of the machine can be assigned freely, and can also be changed
at any time later.
2 - Confirm the security dialogue with „Yes“.