EasyManua.ls Logo

WMF KULT - Scope of Delivery and Machine Parts; Setting Up and Connecting; The Tools

WMF KULT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Do not allow children to play with the
packaging foil. They could become caught in
the foil while playing and suffocate.
This machine is not intended for use by
individuals with limited physical, sensory or
mental abilities or those with a lack of expe-
rience and/or knowledge, unless they are
supervised by another individual responsible
for their safety or have been instructed on
how to use the machine.
Children should be supervised to ensure that
they do not play with the machine.
The blades are very sharp. Keep the blades
and stainless steel knife out of the reach of
children.
Do not remove the lid during operation.
Do not put your hand into the machine
while it is being operated.
Also ensure that long hair, for example, is
kept away from the insertion opening.
Do not insert objects such as spoons, for
example, into the insertion opening when
the machine is in operation.
Do not move the machine during operation.
Never attach or remove accessories during
operation. Always turn off the food
processor and then remove the plug from
the socket.
The blades will continue to rotate after
the machine has been turned off. Wait
until they stop moving before handling the
machine.
Never touch the blades of the cutting
accessories.
Risk of damage!
Incorrect use of the machine can result in
injury.
Do not add any hot fluids.
Do not fill with any hard foods such as
coffee beans, candied sugar, bones, nut
shells etc. or frozen food.
Do not place the machine on surfaces which
are sensitive to water. Water sprays can
damage such surfaces.
Scope of delivery/
machine parts
See Fig. 1:
a Stopper
b Filling tool
c Lid
d Large cutting/grating disc
e Fine cutting/grating disc
f Strip cutting disc (Julienne)
g Beating disc
h Stirring blade
i Kneading blade
j Stainless steel knife
k Knife cover for j
l Drive shaft
m Preparation container
n Motor
o Operating switch
p Power cord with plug
q Spatula
Setting up and connecting
Remove all packaging from the machine.
Clean the machine (see chapter “Cleaning
and Maintenance” on page 16).
Set up the machine on a stable surface near
to a plug socket.
Make sure that the operating switch o is
set to “O” (off).
Plug the power plug p into a correctly
installed and isolated ground socket.
If the power cord is too long, you can roll it
up inside the base of the motor n
The tools
You can cut, grate and chop food and also beat
cream and egg whites using the food processor.
Use the accessory set (sold separately) to also
mix ingredients, squeeze citrus fruits and puree
potatoes (see Fig. 7).

Table of Contents

Related product manuals