What to do if my WMF Kitchen Appliances control lamp is not illuminated?
If the WMF Kitchen Appliance doesn't start and the control lamp is off, first ensure the appliance is properly connected to the power outlet. If it still doesn't work, the overheating protection might be active. In this case, allow the appliance to cool down completely before attempting to use it again.
Why is milk leaking from the lid of my WMF Kitchen Appliances?
If milk is leaking from the lid of your WMF Kitchen Appliance, it could be due to several reasons. First, there might be too much milk in the appliance; try pouring some out. Second, the lid may not be fitted correctly; gently push it down to ensure it's properly sealed. Finally, check if the sealing ring is either missing or dirty. Clean and re-insert the sealing ring if necessary.
General| Control type | Buttons |
|---|---|
| Product color | Black, Stainless steel |
| Housing material | Stainless steel |
| Keep warm function | - |
| Water tank capacity | 1.6 L |
| Adjustable thermostat | No |
| Water level indicator | Yes |
| Power source | AC |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Lid opening type | Button |
| Package depth | 178 mm |
| Package width | 250 mm |
| Package height | 308 mm |
| Package weight | 2020 g |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 170 mm |
|---|---|
| Width | 240 mm |
| Height | 265 mm |
| Weight | 1560 g |
Read manual carefully, keep safe, use for intended purpose, and note household use.
Program for warm, creamy, fine-pored milk froth, ideal for cappuccino or latte.
Program for warm, firmer milk froth, ideal for cappuccino or latte macchiato.
To Next Page
