1.4 Equipment List
Table 2 Equipment List
1.5 Certification Card
Chapter2: Installation
2.1 Installation Requirements
To avoid equipment damage caused by improper use and personal injury, please observe the
following precautions:
Do not place the device near water or in damp places, in order to prevent water or
moisture from entering the device.
Do not place the device in an unstable place, avoid falling damage to equipment.
Make sure that the supply voltage of the device matches the required voltage value.
Do not open the equipment chassis without permission.
Unplug before cleaning the power plug; prohibit the use of liquid cleaning.
Installation Environment Requirements
ONU equipment must be installed in the interior, and to ensure the following conditions:
Confirmation at the ONU installation at sufficient space to facilitate cooling machine.
ONU suitable operating temperature of -5℃ ~ 55 ℃, humidity 10% to 90%.
Electromagnetic Environment
ONU equipment in use can be affected by external electromagnetic interferences, such as
radiation and conduction through the impact on the device, this should note the following:
Device workplace should avoid radio transmitters, radar stations, and high-frequency
interference from power equipment.
To Next Page
Loading...