9
of the date, the two digits [DD] of the hour (24-hour system), the two
digits [EE] of the minute, the two digits [FF] of the second, and finally
enter [#] to confirm. You will hear a long beep and a voice prompt
“setting completed”.
Operating method
: [32]Ö[AA]Ö[BB]Ö[CC]Ö[DD]Ö[EE]Ö[FF]Ö[#]
AA indicates: the last 2 digits of the present year
BB indicates: the 2 digits of the present month
CC indicates: the 2 digits of the present date
DD indicates: the 2 digits of the present hour
EE indicates: the 2 digits of the present minute
FF indicates: the 2 digits of the present second
For example
: set the time as 15:35:40, Oct. 1st, 2009
Operating method
: [32]Ö[09]Ö[10]Ö[01]Ö[15]Ö[35]Ö[40]Ö[#]
Timing Settings
1 Timely Arm
In setup status, use keypad to input [33~35], then input the hour [AA] and
minute [BB] of the time you want to set to arm, and finally input [#] to
confirm. You will hear a long beep and a voice prompt “setting
completed”.
Operating method
: [XX]Ö[AA]Ö[BB]Ö[#]
XX indicates: the address code 33, 34, 35 of the timely arming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example
: set the arm time as 45’ 10pm
Operating method
: [33]Ö[22]Ö[45]Ö[#]
LCD display:
2 Timely Disarm
In setup status, use keypad to input [36~38], then input the hour [AA] and
minute [BB] of the time you want to set to disarm, and finally input [#] to
confirm. You will hear a long beep and a voice prompt “setting
completed”.
10
Operating method
: [XX]Ö[AA]Ö[BB]Ö[#]
XX indicates: the address code 36, 37, 38 of the timely disarming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example
: set the arm time as 55’ 7pm
Operating method
: [33]Ö[22]Ö[45]Ö[#]
LCD display:
3 Timing Control
In setup status, use keypad to input [39], then input the number indicating
turning on timely arm/ disarm [1/0], and then input [#] to confirm. You
will hear a long beep and a voice prompt “setting completed”. The factory
default is off.
Operating method
: [39]Ö[0/1]Ö[#]
0:
turn off the function of timely arm/ disarm
1:
turn on the function of timely arm/ disarm
For example
: turn on the function of timely arm/ disarm
Operating method
: [39]Ö[1]Ö[#]
Alarm Number Setting
In setup state, input [51] ~ [56], then input the voice alarm-receiving
number (mobile number or telephone number), and then press [#] to
confirm. The main unit will make a long beep, the [Signal] indicator will
flicker once, and you will hear “setting completed”, which indicate voice
alarm-receiving number is set successfully.
Operating method
: [XX] Ö [YY…YY] Ö [#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
YY…YY indicates: voice alarm-receiving phone number
For example
: set 13811111111 as the first voice call number
Operating method
: [51] Ö [13811111111] Ö [#]
LCD display:
To Next Page
Loading...
