Wolf 106302 - General Safety Instructions; Work Space Safety; Electrical Safety Precautions

General
Safety
Instructions
IMPORTANTI Read all
safety
instructions. Failure to
comply
with the
following safety
instructions can cause electric
shock,
fire and/or serious
injury.
KEEP
THESE lNSTRUCTlONS W A SAFE PLACE
1. Work
Space
Keep your
work area clean and
tidy.
Messy
and/or
poor
lit work areas can cause accidents.
Do not
operate
the
pillar
drill in
explosive
environments
where flammable
liquids,
fumes or dust are
present.
Pillar
drills
produce sparks
which can
ignite
dust or fumes.
Keep
children and other
people
out of the area when
operating
the
pillar
drill. Distractions
may
lead to loss of
control over the
pillar
drill.
Pay
attention to
environmental influences.
Ensure
your
work area is well lit.
2.
Electrical
Safety
The mains
plug
must fit the socket. The
plug may
not be modified in
any way.
Do not use
adaptors
with
earthed
equipment.
Unmodified
plugs
and
appropriate
sockets reduce the risk of electric shock.
Never
pull
the cable to
unplug
the
pillar
drill,
keep
the
cable from
heat,
oil and
sharp edges.
Avoid
bodily
contact with earthed
objects (such
as
pipes,
radiators,
ovens and
refrigerators).
There is
an increased risk of electric shock when
your body
is
earthed.
Keep
the
pillar
drill out of
rain
and
wet environments.
Water in the
pillar
drill increases the risk of electric
shock.
Do
not use the mains cable for
purposes
for
which it is
not
intended,
such as
carrying
or
hanging up
the
pillar
drill and do not
pull
the cable to
disconnect the
pillar
drill from the mains.
Protect the cable from
heat, oil,
sharp edges
and
moving parts. Damaged
or twisted
cables
increase the risk of electric shock.
Check
extension cables
regularly
for
signs
of
damage.
Damaged
extension cables
must be
replaced.
Cable
reels should
only
be used
when
fully
unrolled,
Wolf—106302
.
Page
7