Wolf 106302 - Personal and Operational Safety; Personal Safety Measures; Correct Handling and Operation

3. Personal
Safety
4-
Be
attentive,
concentrate
on the
job
and use
common sense
when
working
with
pillar
drills.
Do not
operate
the
pillar
drill
when
you
are tired
or under
the influence
of
drugs.
alcohol or
medication
A moment
of carelessness
when
using
the
pillar
drill
can
lead
to serious
injury.
Wear
CE
approved
personal
protective
equipment.
Wearing
CE
approved
personal
protective
equipment
appropriate
to
the
type
of
pillar
drill and
the
application
(such
as a dust
mask,
non»slip
footwear,
a
safety
helmet,
safety goggles
or ear
protection),
reduces
the risk
of
injury.
Avoid
unintentionally
starting
the
pillar
drill. Ensure that
the
power
switch
is
in the 'OFF‘
position
before
connecting
the
pillar
drill to the
mains.
Carrying
the
pillar
drill
with
your
finger
on the
trigger
or
connecting
the
pillar
drill
to mains
when switched
on
can lead to
accidents.
Remove
any adjusting
tools or
keys
before
turning
the
pillar
drill
on.
A tool
or
key
connected
to a
rotating
part
of the
pillar
drill can
lead
to
injuries.
Do not
over-reach.
Maintain
a stable
posture
and
keep your
balance.
This can
improve
your
control over
the
pillar
drill
in
unexpected
situations.
Wear
appropriate
clothing.
Do not
wear loose
fitting
clothes
or
jewellery.
Keep
hair,
clothing,
and
gloves
away
from
moving
parts.
Loose
fitting
clothes,
jewellery
or
long
hair can be
caught
up
in
moving parts.
If dust extraction
or collection
devices
can be
fitted,
ensure
these
are connected
and
correctly operated.
Using
these devices
reduces
the
danger
posed by
dust.
Correct
handling
and
operation
of
pillar
drills
Do
not
overload the
pillar
drill.
Use the
appropriate
pillar
drill for
the
job.
You can
work
more
safely
and
effectively using
the
appropriate
pillar
drill within the
range
of its
capacity.
Do not use
pillar
drills with defective
power
switches.
A
pillar
drill
which
can no
longer
be switched
on and
off
is
dangerous
and must
be
repaired.
Disconnect the
pillar
drill from the
mains
before
carrying
out
adjustments,
changing
pillar
drill
or
accessories and
putting
the
pillar
drill
away.
This
precautionary
measure
prevents
unintentional
starting.
Store
pillar
drills out
of the reach
of children
when
not
in use.
Do not allow
people
who are unfamiliar
with
the
pillar
drill
or have not read
these
instructions
to use
the
pillar
drill.
Maintain
the
pillar
drill with
care, Ensure
the
moving
parts
function
correctly
and
do not
stick. Check
whether
parts
are broken
or
are so
badly
damaged
that
the
pillar
drill’s functions
are
impaired.
Have
damaged
parts repaired
before
operating
the
pillar
drill.
Many
accidents
are caused
by badly
maintained
pillar
drills.
Wolf-106302
—
Page
8