To Next PageTo Next Page
Need help?Do you have a question about the Wolf CGU-2-18 and is the answer not in the manual?
General| Operating Pressure | 3 bar |
|---|---|
| Type | Condensing boiler |
| Efficiency at 80/60 °C | 98% |
| Efficiency | Up to 109% |
| Fuel Type | Natural gas |
Safety measures to take if you detect the smell of gas, including electrical safety and ventilation.
Actions to take if flue gas is detected, emphasizing system shutdown and contractor notification.
Procedure for safely changing a fuse, highlighting the need to isolate power.
Boiler protection against freezing when operational and requirements for draining.
Safety warning regarding potential ice formation on balanced flue systems.
Guidelines for installation by approved contractors and restrictions on modifications.
Advice on avoiding materials and agents that can cause corrosion in the boiler.
Recommendations for managing water hardness to prevent scaling and optimize efficiency.
Instructions for cleaning the boiler casing and the necessity of professional maintenance.
Procedure for filling the heating system with water and checking pressure.
Explanation of the function and operation of shut-off valves for system components.
Regularly checking system pressure and avoiding unauthorized additives.
Explanation of the illuminated signal ring's status indicators for boiler operation.
Guidance on using DHW and heating water temperature selectors for optimal settings.
Tips for saving energy through efficient heating, pump usage, and maintenance.
Utilizing control units, setbacks, and weather compensation for cost savings.
Adjusting room temperatures accurately and using thermostats for efficiency.
Ensuring proper air circulation for radiators and sensors for system effectiveness.
Procedure for handling fault codes and safety warnings related to gas leaks.
