Do you have a question about the Wolf CGU-2 and is the answer not in the manual?
The first step in gas type conversion involves changing the gas manifold.
The second step is to adjust the control unit after the gas type has been converted.
The third step involves checking and adjusting the nozzle pressure.
The final step is the identification process after the conversion is complete.
The first step in gas type conversion involves changing the gas manifold.
The second step is to adjust the control unit after the gas type has been converted.
The third step involves checking and adjusting the nozzle pressure.
The final step is the identification process after the conversion is complete.
Loading...