To Next PageTo Next PageHow to fix faulty stratification sensor on Wolf COB?
If the Wolf Boiler displays a faulty stratification sensor, it indicates a problem with the stratification cylinder sensor or its lead. Check the sensor and lead to resolve this.
How to fix header sensor fault on Wolf Boiler?
If the Wolf Boiler indicates a faulty header sensor, there is likely an issue with the sensor or its lead. Check the sensor and lead to troubleshoot.
Why Wolf COB Boiler has insufficient water pressure?
If the Wolf Boiler displays insufficient water pressure, it's because the pressure switch isn't activating due to low water pressure (below 0.8 bar). Ensure the system pressure is above 1.5 bar, inspect the water pressure switch and its lead, and then press the reset button.
General| Combustion Type | Condensing |
|---|---|
| Fuel Type | Natural Gas |
| Efficiency | Up to 98% |
| Ignition System | Electronic Ignition |
| Modulation Ratio | 10:1 |
| Heating Capacity | 399, 000 BTU/hr |
| Weight | Varies by model |
| Dimensions (HxWxD) | Varies by model |
| NOx Emissions | Low NOx |
