Wolf DF304 - Page 8

8 | Wolf Customer Care 800.222.7820
INSTALLATION
Placement
Do not lift or carry the oven door by the door handle. The
range has rear casters which allow for easy movement by
lifting the front of the unit.
Use an appliance dolly to move the unit near the opening.
Remove and recycle packing materials. Do not discard the
anti-tip bracket supplied with the range.
If a riser has been specied, refer to the installation instruc-
tions packaged with the riser. The riser must be installed
before the range is installed.
Anti-Tip Bracket
Raise the unit to its desired height by adjusting the front
legs and rear casters. Use a
3
/4" socket to adjust the rear
casters. The front legs can be adjusted by rotating the hex-
agonal leg clockwise to raise and counterclockwise to lower.
To ensure the anti-tip bolt engages the bracket, refer to the
chart and illustration below to determine proper placement.
ANTI-TIP BRACKET
WIDTH A
30" Range
3
/16" (5)
36" Range
9
/16" (14)
48" Range
3
/16" (5)
60" Range
5
/16" (8)
A
ANTI-TIP
BRACKET
Anti-tip bracket location.