14
Stop the engine.
Open the fuse box.
Use a power detector to detect the constant power and ACC power (emergency power).
*note: Use an ACC power supply of 15A to 25A. Use a constant power supply below 30A.
Connect the yellow fuse to the constant power source, the red fuse to the ACC power
source, and the ground terminal (black wire) to the metal part of the body.
Installation - Connect the following three cables to the car fuse box. (The position of the fuse
box differs depending on the model)
Hardwire Kit Installation
Dedicated Hardwire kit Asin:B09X1L1GMX
Step:
To Next Page
Loading...
