27
Mode 2: Time lapse recording
Turn on “Time Lapse”, set 0.5Sec/1Sec/5Sec and set Time-Lapse Recording
Time(12H/24H/72H).
After the car engine is off, the camera will turn off automatically, and prompt "Enter time lapse
mode!" on the screen. If you turn the G-Sensor among Low, Medium and High, the parking
video will be locked when there’s collision or vibration detected.
Driving Mode/Always on/Auto LCD Off
NOTE:
Display Mode
Collision-boot-recording won't work when Time Lapse is turned on.
If you need this function,Please connect the hardwire kit.(CONTACT US to get hardwire kit)
Only work after the dash cam is powered off.
Recommended to adjust to medium/low.
To Next Page
Loading...
