07
2. Make sure to clean your windshield from the dust
particles and attach the electrostatic sticker to the
windshield.
3. Peel off the tape attached to the GPS built-in
bracket and attach it on the electrostatic sticker.
About electrostatic Sticker
Since the adhesive strength is strong on both sides and it is difficult to peel off once it
is pasted, it will be troublesome if it is pasted in the wrong place. Therefore, we design
the electrostatic sticker to attached to the windshield first,then stick the bracket with
Adhesive on the electrostatic sticker. You can easily readjust by sticking the Adhesive on
electrostatic sticker and peel it off.
To strengthen the fixing force,do not attach the unit and leave it for 24 hours or more.
To Next Page
Loading...
