17
09/2004
Schleifmaschine MAMBO, Artikel-Nr. 013495
, ab 324 vom 21-09-04Fugenfräse FRÄSMASTER
7.0 Use of grinding and milling discs
For the grinding machine MAMBO we provide a variety of accessories. The following table contains the
information to choose the right disc for your need, It is meant as guiding principle for the different applications.
In chapter 7.2 you find a detailed description of the different discs. In chapter 5.0 you find a recommendation
for using the speed control.
7.1 Use
Screeds + levelling compounds
Cleaning and brushing Paper grinding disc grade 24,
corrugated steel-brush disc
Removing light dirt and flooring residues Carbide grinding disc grade 16
like paint, mortar, felt or foam cylindrical brush disc, flat steel brush disc
Removing tough dirt and flooring residues Carbide grinding disc grade 16
like adhesive, felt or foam System carbide milling disc,
milling disc with star wheel segments
Removing tough and tenacious System carbide milling wheel disc
adhesive (bituminous) residues
Removing Epoxy- and PU-laquer System carbide milling wheel disc
Removing Epoxy-coatings System diamond milling disc
Removing PU-coatings milling disc with star wheel segments,
System carbide milling disc,
Carbide grinding disc grade 24
Removing the loose sintered Carbide grinding disc grade 16,
material on new anhydrite- and paper grinding disc grade 16
magnesia screed cylindrical brush disc, flat steel brush disc
Finish grinding and levelling Paper grinding disc grade 40-60,
grinding gauze grade 80-120
Rough grinding and abrading Paper grinding disc grade 16-24, Carbide
grinding disc grade 24, grinding disc 6 stone
Dismounting and milling of soft or moderately Carbide grinding disc grade 16, grinding
hard screed and levelling compounds disc 6 stones, milling disc with star wheel
segments, system carbide milling disc
Grinding extremely hard smoothing System diamond milling disc
compounds and industrial floors, as well as
epoxy coatings
Grinding of parquet and cork
Grinding and abrading timber Paper grinding disc grade 80
Grinding/polishing parquet + cork Grinding gauze grade 180
Grinding of parquet varnish, laquer Grinding gauze grade 60
and old surfaces
To Next Page
Loading...