Wolverine MovieMaker Pro - Mount the Source Reel

3
Zoomed view of Control Buttons:
3. Mount source reel onto the left-hand take up arm (red). Reel should be placed onto arm
so that the sprocket holes on the film strip are on the side closest to the MovieMaker
Pro (away from you). If source reel is installed backwards, it won’t advance
automatically and will need to be flipped.
POWER Button.
Turns machine on
and off
MENU Button.
Brings up selection
menu. Used as back
button when on
sub-menus
UP Button.
Moves selection
or value up
DOWN Button.
Moves selection
or value down
ENTER Button.
Use to select
option in menu
view and to start
/ stop recording
during recording
session
Holes facing towards
machine. Film tail coming
down from left of reel