7
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1. To turn the system ON, rotate the ON/OFF-VOLUME control knob
clockwise and set the VOLUME to appropriate level.
2. Press AM/FM buttons for the desired band, AM or FM.
3. Rotate the TUNING control knob to select the desired radio station.
Or press and hold BACKWARD / FORWARD SEEK button ( or )
for two seconds to search station automatically.
4. Rotate the ON/OFF-VOLUME control knob to desired volume level.
5. When finished listening, rotate ON/OFF-VOLUME control knob
counterclockwise to turn radio off.
ANTENNA INFORMATION
AM- A horizontal ferrite bar inside the radio is used for receiving AM
stations. If AM reception is unsatisfactory try rotating the unit horizontally.
Reception of weak distant stations and interference at night may cause
stations to be more difficult to receive. You could try repositioning the
8
radio in different location or near a window to obtain the optimum
reception.
FM- The FM wire antenna is located on the back of the radio. If necessary
adjust the position and direction of this antenna until you find the position
that provides the best reception.
Note: Do not place the unit over steel desk or metal surface, as this may
lead to interference of reception.
BLUETOOTH OPERATION
1.
2.
3.
4.
Turn the system ON, rotate the ON/OFF-VOLUME control knob and set
the VOLUME to appropriate level.
Press BLUE TOOTH button to choose the bluetooth function.
'BLUE TOOTH' icon and word 'bt' will show on the LCD.
Turn ON bluetooth search function on your bluetooth compatible device.
Search for "Retro 100". Select "Retro 100" to connect. Play music from
your bluetooth media device and the sound will be heard from
Wolverine Retro. Press FORWARD SEEK or BACKWARD SEEK
To Next Page
Loading...
General