Wood-mizer BMS250 User Manual

BMS200/250 SHARPENER
Safety, Operation, Maintenance
& Parts Manual
BMS200 rev. B.05
BMS250 rev. B.05
Safety is our #1 concern! Read and understand
all safety information and instructions before
operating, setting up or maintaining this machine.
Fo
rm #944_en
!
This is the original language
for the manual.

Wood-mizer BMS250 Specifications

General

Blade size	1-1/4 inches wide x 0.042 inches thick x 144 inches long
Max log diameter	36 inches (91 cm)
Max cut length	12' 5" (3.8 m)
Power options	Electric motor or gasoline engine
Cutting Length	12' 5" (3.8 m)
Blade Speed	Variable
Log Diameter Capacity	36 inches (91 cm)
Power Source	Gasoline engine or electric motor

Summary

Safety and General Information

Electrical and Handling Safety Precautions

Safe electrical practices and blade handling.

Machine Operation Safety Guidelines

Safe operation of the sharpener.

Setup and Operation Procedures

Machine Startup and Initial Setup

Conditions for starting and installing supports.

Blade and Grinding Wheel Installation

Procedures for installing blades and grinding wheels.

Sharpening Adjustments and Operation

Adjusting grind, feed, oil, operation overview, specific blade types.

Blade Rejection Criteria and Shutdown

Maintenance and Troubleshooting

Routine Maintenance Tasks

Daily, weekly, and monthly upkeep.

Blade Sharpening Best Practices

Alignment Procedures

Head Stop Alignment Adjustment

Adjusting the head stop position.

Sharpener Alignment Tool Usage

Standard Operating Procedures

BMS 250 Sharpening Alignment

Detailed alignment for the sharpening process.

Properly Sharpened Teeth Identification

ReSharp Process Overview