What to do if the circuit breaker kicks out on Wood-mizer LTAGA?
If the circuit breaker on the back of the Wood-Mizer Power Tool control box kicks out, wait 15 seconds. Then push in and release the circuit breaker. This may happen if you are grinding too much material at once or if you dress the grinding wheel too heavily.
General| Brand | Wood-mizer |
|---|---|
| Model | LTAGA |
| Category | Power Tool |
| Language | English |
Focuses on critical safety instructions and warnings for operating the sharpener.
Identifies and describes the various components of the automatic sharpener.
Instructions for assembling the sharpener's stand for sitting or standing height.
Details the steps for correctly installing the coolant pump system.
Steps for making electrical connections to the control box and testing.
Procedure for adjusting and verifying the hook angle using a template.
Guide on selecting and installing the correct grinding wheel for the sharpener.
Procedure to adjust the grinding wheel contact with the tooth face for optimal grinding.
How material removal from the gullet controls the tooth height and gullet grind.
Using the depth/back grind knob to control material removal from the gullet.
Adjusting the grinding wheel's back angle to regain a sharp tooth tip.
Steps for aligning the blade clamp and grinding wheel using the alignment tool.
Step-by-step guide for operating the automatic sharpener to sharpen blades.
Explains the function and installation of the magnetic shut-off sensor.
Procedure for safely removing a blade from the sharpener after use.
Guide on how to navigate and understand the replacement parts list.
List of parts for the sharpener's stand assembly.
Replacement parts for the blade clamp and coolant delivery system.
Replacement parts for the main grinder motor and housing assembly.
Replacement parts for the sharpener's electrical control box and components.
Schematic of the sharpener's electrical connections for troubleshooting.
Routine maintenance procedures to keep the sharpener in optimal condition.
Guidance on maintaining the grinding wheel's shape and condition.
Practical advice and tips for effective blade sharpening.
To Next Page
