To Next PageTo Next Page
Need help?Do you have a question about the Wood-mizer BMS200 and is the answer not in the manual?
General| Blade Speed | Variable, depending on model and setup |
|---|---|
| Maximum Cut Height | 200 mm |
| Maximum Cut Width | 200 mm |
| Max Log Diameter | 200 mm |
| Fuel Type | Petrol or electric |
Essential safety rules, operation, electrical safety, and warning decals.
Ordering parts, service, nomenclature, dimensions, and technical specs.
Steps for starting, installing blade support, adjusting height, and mounting grinding wheel.
Adjusting grinds, feed rate, oil flow, operation overview, rejection criteria, and shutdown.
Procedures for replacing the grinding wheel and checking the oil level.
Daily, weekly, and monthly maintenance tasks for the sharpener.
Advice for effective blade sharpening and common troubleshooting tips.
Steps for aligning the sharpener head stop and the main sharpener components for optimal performance.
Procedures for ensuring correct sharpening alignment and identifying properly sharpened teeth.
Comprehensive guide to the ReSharp process for restoring used blades.
Instructions on navigating and utilizing the replacement parts list.
List of parts for the blade support assembly, including guide kits.
Components of the grinder assembly, including the sharpener head and motors.
Various grinding wheels and associated hardware for the grinder assembly.
Parts related to the oiler, safety decals, and grinding oil.
List of parts comprising the sharpener mounting plate assembly.
Detailed list of parts for the blade clamp assembly.
Parts for the blade clamp mechanism and the blade wiper.
Parts for the oil pump, pan, and control box specific to the BMS250 model.
Parts for the oil pump, pan, and control box specific to the BMS200 model.
Various decals and electrical components for the BMS200 control box.
Detailed list of parts for the cam and index arm drive assembly.
Various cam profiles and parts for the index arm mechanism.
Parts related to the cam lever, bearings, and bushings.
List of parts for the sharpener cover assembly.
Decals and hardware components for the sharpener cover.
Parts list for the sharpener alignment tool and blade profile template.
Declaration of conformity with EC directives, listing standards and responsible personnel.
