Wood-mizer HR115 User Manual

Explains hazard alert symbols and their meanings for safe operation.

Provides critical instructions for safe operation and machine handling.

Details required personal protective equipment for safe operation and maintenance.

Outlines essential pre-operation checks to ensure machine safety and functionality.

Warns against contact with moving parts, hot components, and rotating machinery.

Stresses the need for qualified personnel and safe practices during maintenance.

Instructs users to maintain the visibility and integrity of all safety decals.

Introduces the machine's control panel components and their functions.

Covers the essential conditions and procedures for setting up the resaw machine.

Provides detailed steps and safety precautions for changing the saw blade.

Guides users on how to correctly tension the saw blade for optimal performance.

Explains how to align the blade on the wheels for proper tracking and cutting.

Describes how to adjust the saw head tilt for producing siding.

Details the operation of the up/down system for adjusting the cutting head height.

Covers the safety checks and procedures for starting the resaw machine.

Explains the use of the blade height scale and indicator for precise cutting.

Describes the function and use of the water lube system for blade cleaning.

Provides a step-by-step guide for the entire resaw operation process.

Lists estimated life expectancy of common replacement parts for planning.

Details lubrication points and recommended lubricants for machine components.

Covers maintenance procedures for the up/down screw, bellows, and lubrication.

Explains how to adjust the drive belt tension for optimal power transmission.

Details the required checks for safety devices before each shift.

Outlines initial steps and considerations for accurate machine alignment.

Covers the process of installing a blade and checking its initial alignment on the wheels.

Details how to adjust the vertical and horizontal alignment of the blade wheels.

Explains the four steps for aligning the blade guide assemblies.

Describes how to measure and adjust the vertical tilt of the blade guides.

Explains how to adjust the spacing of the blade guide flanges.

Details how to adjust the horizontal tilt of the blade guide rollers.

Covers the procedure for adjusting the motor drive belt tension.

Explains how to adjust the height of the hold-down roller.

Details the process for adjusting the feed belt tension.

Lists the major dimensions of the HR115 and HR115 Wide resaw models.

Provides information on the material size and performance capacities of the resaw.

Lists the specified belt sizes used on the resaw.

Lists the specifications for the dust extractor system used with the resaw.