Safety & General Information
Sawmill Setup
Safety & General Information 15doc012809 1-2
1
1.2 Sawmill Setup
WARNING! Do not set up the mill on ground with more than a 10
degree incline. If setup on an incline is necessary, put blocks under
one side of the mill or dig out areas for the legs to keep mill level.
Setting up the mill on an incline could cause it to tip over, resulting in
serious personal injury.
WARNING! Keep all persons out of the path of the saw head while
loading and unloading the sawmill. Failure to do so may result in seri-
ous injury or death.
1.3 Sawmill Operation
DANGER! Make sure all guards and covers are in place and
secured before operating or towing the sawmill. Failure to do so may
result in serious injury.
DANGER! Be sure the blade housing and pulley covers are in place
and secured.
DANGER! Always keep hands away from moving bandsaw blade.
Failure to do so will result in serious injury.
DANGER! Keep all persons out of the path of moving equipment and
logs when operating sawmill or loading and turning logs. Failure to
do so will result in serious injury.
DANGER! Maintain a clean and clear path for all necessary move-
ment around the mill and lumber stacking areas. Failure to do so will
result in serious injury.
DANGER! Always be sure the blade is disengaged and all persons
are out of the path of the blade before starting the engine or motor.
Failure to do so will result in serious injury.
WARNING! Always disengage the clutch/brake mechanism when-
ever the sawmill is not cutting. Failure to do so may result in serious
injury.
WARNING! Always wear eye, ear, respiration, and foot protection
when operating the sawmill. Failure to do so may result in serious
injury.
WARNING! Secure all loose clothing and jewelry before operating
the sawmill. Failure to do so may result in serious injury or death.
WARNING! Always make sure log is clamped securely before saw-
ing. Failure to do so may result in serious injury or death.
To Next Page
Loading...
