To Next PageTo Next PageWhat to do if there is no water from the nozzle of my Woodbridge BID 02?
If there's no water coming from the nozzle of your Woodbridge Toilets, there are a few possible reasons. First, check if the water inlet hose is bent, causing a blockage; if so, solve the bending problem. Next, ensure the inlet valve is turned on. Finally, verify that the water supply hasn't been cut off; if it has, connect the water supply and wait.
Why is the water cleaning weak on my Woodbridge Toilets?
A weak water cleaning in your Woodbridge Toilets could be due to a few reasons. The water inlet hose might be bent, causing a partial blockage, so solve the bending problem. Also, the water inlet valve might not be fully open, so ensure it's fully turned on. Lastly, the inlet filter could be blocked, so try cleaning the filter.
What to do if the nozzle rod cannot retract on Woodbridge BID 02 Toilets?
If the nozzle rod on your Woodbridge Toilets won't retract, it could be due to a power issue. If the power is off, lightly push back the nozzle rod and then turn the power on. Another possibility is that the nozzle is stuck due to impurities; in this case, clear away any impurities.
Why won't the nozzle rod stretch out on my Woodbridge BID 02?
If the nozzle rod on your Woodbridge Toilets isn't stretching out, first ensure that the power is on. Also, make sure you are sitting correctly in the sensing area.
Why is the seat temperature low on my Woodbridge BID 02?
A low seat temperature on your Woodbridge Toilets may be because the seat temperature is set to a normal level; in this case, reset the seat temperature. Alternatively, the toilet might be in standby mode; switch to operating mode and wait for 3 minutes before use.
How to fix low water temperature on Woodbridge BID 02 Toilets?
If the water temperature is low on your Woodbridge Toilets, it might be set to a normal temperature level. Try resetting the water temperature.
Why is the wind temperature low in my Woodbridge BID 02?
If the wind temperature is low in your Woodbridge Toilets, it could be that the wind temperature is set to a normal level. In this case, reset the wind temperature.
What to do if there is no wind coming out of my Woodbridge Toilets?
If there's no wind coming out of your Woodbridge Toilets, it might be in standby mode or power-saving mode. Shift to operating mode to use the dry function.
Why does the remote control not display anything for my Woodbridge Toilets?
If the remote control for your Woodbridge Toilets isn't displaying anything, the battery might be installed in the wrong direction. Try reloading the battery.
Why is the deodorization malfunctioning on my Woodbridge BID 02 Toilets?
A malfunction of deodorization in your Woodbridge Toilets could be due to not reaching the sensing area on the seat; adjust your position to reach it. Also, it is normal if the deodorization function keeps working after you leave to ensure eliminating smell entirely.
General| Brand | Woodbridge |
|---|---|
| Model | BID 02 |
| Category | Toilets |
| Language | English |
