To Next PageTo Next PageWhat to do if no water comes out of my Woodbridge B0931S nozzle?
If no water is coming from the nozzle of your Woodbridge Toilets, there might be a few reasons: * The water supply hose could be kinked. If so, straighten the hose. * The angle valve might be off. Turn the angle valve on. * There may have been a water failure. Restore the water supply.
Why is the water spraying poorly on my Woodbridge B0931S?
If you're experiencing poor water spraying with your Woodbridge Toilets, consider the following: * A kinked water supply hose can cause this. Straighten the hose to remove any kinks. * The angle valve may not be fully turned on. Ensure it is fully opened. * The filter might be clogged. Try cleaning the filter.
How to fix a Woodbridge B0931S Toilets remote control that cannot display?
If your Woodbridge Toilets remote control isn't displaying anything, check these: * Make sure the batteries are loaded in the correct direction (+ and -). * The batteries may be low. Try replacing them with new ones.
What to do if the spray wand on my Woodbridge B0931S Toilets cannot retract?
If the spray wand on your Woodbridge Toilets won't retract, it could be due to: * A power outage. Gently push the spray wand back in and then turn the power on. * The wand might be stuck due to impurities. Remove any impurities that are blocking it.
Why won't the spray wand stretch out on my Woodbridge Toilets?
If the spray wand on your Woodbridge Toilets isn't stretching out, check these possible causes: * The power might be off. Turn the power on. * The sensor may not be activated because you are not within the sensing area of the seat. Adjust your position on the seat.
Why is the seat temperature low on my Woodbridge B0931S Toilets?
If you're experiencing a low seat temperature on your Woodbridge Toilets, consider these possibilities: * The seat temperature may not be set properly. Adjust the seat temperature. * The unit might be in standby or energy-saving mode. Switch to functional mode and wait for at least 3 minutes.
What to do if the dryer is not blowing on my Woodbridge Toilets?
If the dryer isn't blowing on your Woodbridge Toilets, it might be in standby mode. Switch to functional mode to use the dry function.
General| Brand | Woodbridge |
|---|---|
| Model | B0931S |
| Type | One-Piece |
| Flush System | Dual Flush |
| Flush Rate | 1.28/0.8 GPF |
| Bowl Shape | Elongated |
| Rough-In | 12 inches |
| Material | Vitreous China |
| Vitreous China | Yes |
| Seat Included | Yes |
| Seat Height | 16.5 inches |
| Color | White |
| WaterSense Certified | Yes |
| ADA Compliant | Yes |
| Height | 28.5 inches |
| Seat Type | Soft-Close |
Basic safety precautions for using the appliance, especially when children are present.
Instructions to reduce the risk of electrocution, such as avoiding use while bathing.
Precautions to prevent burns, electrocution, fire, or injury, particularly regarding children.
Guidelines for proper grounding to minimize the risk of electric shock.
Steps for installing the water supply angle valve.
Guide for using the rough-in template for placement.
Instructions for assembling and installing the mounting bracket.
Procedure for seating and securing the ceramic toilet bowl.
Steps for securing the toilet bowl with screws and decorative caps.
Connecting the water supply hoses to the toilet and angle valve.
Steps including valve operation, power connection, and self-inspection.
Steps to manage power outages and water supply interruptions.
