Why is my Woodbridge Toilet not flushing?
If your Woodbridge Toilet isn't flushing, the issue might be due to a few reasons. Check if the water supply hose is buckled, causing a blockage; if so, solve the buckling. Also, ensure the fill valve is turned on and that the water supply isn't cut off. If it is, connect the water supply and wait for the water to fill.
Why is my Woodbridge Toilet flushing poorly?
A poor flush in your Woodbridge Toilet could stem from a few causes: A partially blocked water supply hose due to buckling – solve the buckling to restore full flow. The fill valve may not be fully open, so ensure you turn it on completely. Lastly, a dirty filter can cause a blockage; try cleaning the filter.
How to flush Woodbridge B0950S during a power outage?
In case of a power failure with your Woodbridge toilet, you can manually flush by pressing the full/half flush button.
What to do if spray wand cannot retracted in Woodbridge Toilets?
If the spray wand on your Woodbridge Toilet won't retract, first, check if the power is off. If it is, gently push back the wand and wait for the power to return. Alternatively, the wand might be stuck due to impurities; clear away any obstructions.
What to do if spray wand cannot stretch out in Woodbridge B0950S?
If the spray wand on your Woodbridge Toilet isn't stretching out, make sure the power is on. If it was off, gently push back the wand and wait for the power to come back on. Also, ensure you are properly seated in the sensing area; the wand won't extend if it doesn't detect your presence.
Why is the deodorization malfunctioning on my Woodbridge Toilet?
The deodorization function on your Woodbridge Toilet might not work if you aren't properly seated in the sensing area; adjust your position to ensure you're detected. Also, it's normal for the deodorization function to continue working after you leave the seat to ensure complete odor elimination.
Why is the seat temperature not hot on my Woodbridge Toilet?
If the seat temperature on your Woodbridge Toilet isn't hot enough, check if the seat temperature is set to a normal level and reset it to your desired warmth. Also, if the toilet is in standby mode, shift to function mode for at least 3 minutes to activate the heating.
How to fix controller display on Woodbridge B0950S?
If the controller on your Woodbridge Toilet isn't displaying anything, the battery polarity might be reversed. Try reloading the battery correctly.
Why is the water not hot in my Woodbridge Toilet?
If the water in your Woodbridge Toilet isn't hot, it might be because the water temperature is set to a normal level. Try resetting the water temperature to your desired setting.
Why is the wind temperature not hot on my Woodbridge Toilet?
If the wind temperature on your Woodbridge Toilet isn't hot enough, the wind temperature might be set to a normal level. Try resetting the wind temperature to your preferred warmth.
General| Type | One-piece |
|---|---|
| Material | Vitreous China |
| Height | 28.5 inches |
| Width | 14.5 inches |
| Water Consumption | 1.28 GPF |
| Bowl Shape | Elongated |
| Rough-In | 12 inches |
| Toilet Height | Comfort Height |
| Model Number | B0950S |
| Brand | Woodbridge |
| Color | White |
| Seat Included | Yes |
| ADA Compliant | Yes |
To Next Page