Woodbridge BID 02 - User Manual

Other manuals for Woodbridge BID 02

Installation Manual14 pages

Questions and Answers

A
Amy LewisAug 16, 2025
What to do if there is no water from the nozzle of my Woodbridge BID 02?
- S
  Stephanie AlexanderAug 16, 2025
  If there's no water coming from the nozzle of your Woodbridge Toilets, there are a few possible reasons. First, check if the water inlet hose is bent, causing a blockage; if so, solve the bending problem. Next, ensure the inlet valve is turned on. Finally, verify that the water supply hasn't been cut off; if it has, connect the water supply and wait.
C
Carol LambertAug 19, 2025
Why is the water cleaning weak on my Woodbridge Toilets?
- M
  Michelle RyanAug 19, 2025
  A weak water cleaning in your Woodbridge Toilets could be due to a few reasons. The water inlet hose might be bent, causing a partial blockage, so solve the bending problem. Also, the water inlet valve might not be fully open, so ensure it's fully turned on. Lastly, the inlet filter could be blocked, so try cleaning the filter.
J
jay12Aug 21, 2025
What to do if the nozzle rod cannot retract on Woodbridge BID 02 Toilets?
- W
  williamsashleyAug 21, 2025
  If the nozzle rod on your Woodbridge Toilets won't retract, it could be due to a power issue. If the power is off, lightly push back the nozzle rod and then turn the power on. Another possibility is that the nozzle is stuck due to impurities; in this case, clear away any impurities.
B
brianandersonAug 25, 2025
Why won't the nozzle rod stretch out on my Woodbridge BID 02?
- A
  Anita DominguezAug 26, 2025
  If the nozzle rod on your Woodbridge Toilets isn't stretching out, first ensure that the power is on. Also, make sure you are sitting correctly in the sensing area.
R
richard08Aug 28, 2025
Why is the seat temperature low on my Woodbridge BID 02?
- D
  David MorrisonAug 28, 2025
  A low seat temperature on your Woodbridge Toilets may be because the seat temperature is set to a normal level; in this case, reset the seat temperature. Alternatively, the toilet might be in standby mode; switch to operating mode and wait for 3 minutes before use.
J
John HillAug 31, 2025
How to fix low water temperature on Woodbridge BID 02 Toilets?
- C
  cruzerikaAug 31, 2025
  If the water temperature is low on your Woodbridge Toilets, it might be set to a normal temperature level. Try resetting the water temperature.
A
Anthony HansenSep 3, 2025
Why is the wind temperature low in my Woodbridge BID 02?
- Q
  qbushSep 3, 2025
  If the wind temperature is low in your Woodbridge Toilets, it could be that the wind temperature is set to a normal level. In this case, reset the wind temperature.
M
Michael HumphreySep 6, 2025
What to do if there is no wind coming out of my Woodbridge Toilets?
- J
  Jennifer GloverSep 6, 2025
  If there's no wind coming out of your Woodbridge Toilets, it might be in standby mode or power-saving mode. Shift to operating mode to use the dry function.
E
Eric RichardsonSep 9, 2025
Why does the remote control not display anything for my Woodbridge Toilets?
- M
  Monica DominguezSep 9, 2025
  If the remote control for your Woodbridge Toilets isn't displaying anything, the battery might be installed in the wrong direction. Try reloading the battery.
R
Ruben DrakeSep 12, 2025
Why is the deodorization malfunctioning on my Woodbridge BID 02 Toilets?
- W
  williamsalexanderSep 12, 2025
  A malfunction of deodorization in your Woodbridge Toilets could be due to not reaching the sensing area on the seat; adjust your position to reach it. Also, it is normal if the deodorization function keeps working after you leave to ensure eliminating smell entirely.