10
Setting Up the Wood Chipper
Setting Up the Wood Chipper
(continued)
Step 11: Apply downward pressure
to the trailer tongue so that the base
frame lifts off the crate base. Have a
jack ready to go before doing this step.
NOTE: The next step
requires at least two
people to complete.
Step 9: Insert the retaining pin.
Step 10: Tighten the hardware securing
the run-away chains and trailer hitch.
Step 12: Quickly roll a floor jack under
the chipper base to support the chipper.
Step 13: Secure the floor jack.
To Next Page
Loading...